Moon School Holds - Set F 40 climbing holds

The latest addition to the MoonBoard range, the new School Set F consists of 40 polyester climbing holds in Sky Blue. The ergonomic holds, featuring shapes such as jugs, pinches, and edges, will challenge your foot movement and create more varied and complete moves, seriously improving your climbing both physically and technically. The MoonBoard sets the standard for indoor training and is globally recognized as one of the most effective tools for climbing strength enhancement. The 2024 setup includes 198 holds, specifically composed of:

• The three new polyester sets D, E, and F
• The wooden holds Sets A, B, and C

WARNING

The School Holds Sets D, E, and F are made of polyester resin (PE), unlike the School Holds Sets A, B, C, and the Originals, which are made of polyurethane resin (PU). The main advantage of using polyester resin is that the texture is resistant to polishing. This is particularly important when:

• The shape of the holds makes their use highly dependent on friction, as in the case of slopers or pinches
• The position of the holds is rarely changed, such as on a training board with fixed holds like the MoonBoard

Due to the style and shape of sets D, E, and F, Moon deemed polyester to be the most suitable material choice. The disadvantage of polyester is that it is more prone to chipping or breaking if dropped or if too much force is applied when securing. Therefore, they should be handled with care during unpacking and installation:

• If a hold falls onto a hard surface or even another hold, it is likely to chip
• If too much force is applied to either the fixing bolt or the anchor screw, there is a risk of breaking the holds

Moon recommends securing the holds manually with a hand wrench and taking care not to over-tighten either the fixing bolt or the anchor screw. Handle with care!

Handle them carefully during unpacking and installation, and they will provide many years of use.

TECHNICAL FEATURES

• 40 holds
• Polyester material that will retain its friction and texture even after many years of intensive use
• Bolt-on holds
• Each hold includes an embedded washer (for strength), the Moon Climbing logo, the number, and orientation markers to allow problem replication on any MoonBoard, anywhere in the world
• Designed to integrate with the MoonBoard at 40 degrees and 25 degrees
• Climbing from intermediate to advanced
• Box weight: 17.5kg

INSTALLATION TIPS

• Do not use an impact driver to install the holds
• If a bolt hold has a screw hole, we recommend securing the hold with a small screw (about 4mm or 5mm diameter). The screw should be long enough to pass through the bolt hold and into the wooden panel to which the hold is mounted

View the current MoonBoard hold configurations using the free MoonBoard app or by visiting the MoonBoard website.